Visual Departure remains an IFR procedure
A visual approach must not be confused with a switch to VFR. The flight remains IFR and is still subject to air traffic control. Only the approach path can deviate from a published SID or other IFR approach procedure based on visual reference to the ground.
A pilot can request a visual departure themselves. Alternatively, ATC can offer the procedure already before takeoff. In this case, the pilot accepts the clearance by properly reading it back.
The international standard phraseology, for example, stipulates a clearance pattern of „VISUAL DEPARTURE RUNWAY 05 APPROVED, TURN RIGHT DIRECT TO …, MAINTAIN VISUAL REFERENCE UNTIL …“.
Weather and Earth view must be sufficient until MSA
A visual departure may only be performed if the weather conditions during takeoff and subsequent climb are adequate. The main cloud ceiling and ground visibility must allow the required visual reference to be maintained up to the minimum sector altitude specified in the air traffic control manual.
Furthermore, the procedure in Germany is still limited to the present day.
The pilot should therefore not only check that the runway and its immediate surroundings are visible. What is crucial is whether visual flight control remains safe throughout the entire cleared section.
Freedom from obstacles is the pilot's prerogative
The most important difference to a published IFR departure procedure concerns obstacle clearance. With a SID, the protected departure path is based on a defined procedure with defined obstacle criteria. If a pilot leaves this path during a visual departure, he or she assumes full responsibility for safely avoiding terrain and obstacles.
ATC, however, remains responsible for the allocation of airspace to other controlled traffic according to the respective airspace class.
Therefore, in unfamiliar airports or in hilly and mountainous terrain, a visual departure is by no means automatically the simpler option. The shorter flight path can be associated with a significantly higher responsibility for one's own navigation and terrain clearance.
New NfL separates Visual Departure and Start Release more clearly
The most noticeable change in the version that will be in effect from November 26th concerns the granting of the permit.
A Visual Departure can be issued together with the route clearance or shortly before a roll-out or takeoff clearance. At the same time, the new announcement explicitly states that this does not grant clearance for either the roll-out onto the runway or the takeoff itself.
If the Visual Departure clearance is transmitted separately, the phrasing must clearly indicate that a separate roll-out or start clearance is still required.
For pilots, this is an important human-factors barrier: A clearance such as „Visual Departure approved“ does not mean „Cleared for Take-off“.
Visual departures are basically possible at all IFR airfields
In principle, visual departures are possible at all German airports with IFR approval, provided the requirements are met. However, local restrictions can prohibit the procedure or limit it to certain aircraft types and runways.
These restrictions exist primarily for noise protection and operational reasons. However, visual departures are still possible for many GA aircraft at numerous major airports.
For example, in Dortmund, Düsseldorf, Cologne/Bonn, Lübeck, Mönchengladbach and Weeze, propeller aircraft up to 5.7 tons MTOW are permitted on the aforementioned runways. In Hanover, all propeller aircraft as well as jets up to 20 tons are permitted, in Münster/Osnabrück propeller aircraft up to 22 tons as well as certain other models. Saarbrücken allows visual departures on runway 27 for all aircraft.
In Berlin, Frankfurt and Munich, however, stricter restrictions apply, which essentially limit the number of two-engine propeller aircraft to a maximum of DHC-7 or partially helicopter aircraft.
Exceptions in case of navigation failures and thunderstorms
Local restrictions do not apply without exception. A visual departure can also be possible there if navigation assistance required for normal instrument flight fails unexpectedly or if all published runway departure procedures are not available at short notice.
Significant weather conditions can also play a role. For example, if a thunderstorm is located within the area of a published SID, a visual departure under appropriate conditions can be a way to deviate from it.
However, this does not mean that a Visual Departure is automatically approved as a „weather avoidance“. The pilot and ATC must continue to ensure that weather, airspace and obstacle conditions allow the procedure to proceed.
What pilots should practically observe
For the practice, the procedure can be reduced to a few points: the flight remains IFR, the visual reference must remain within the specified altitude, and the pilot has clearance to avoid obstacles. An offered visual departure clearance does not have to be accepted if terrain, weather, or local knowledge against it.
Equally important is the clear separation of clearances. „Visual Departure approved“ merely authorizes the visual guidance of departure. Only „Line up“ allows the roll out, and only „Cleared for Take-off“ actually allows takeoff.
Conclusion
The new NfL does not fundamentally change the principle of visual departure, but it does provide an important clarification in the process of clearances. From November 26, 2026, it is explicitly stated that the clearance for visual takeoff does not include roll-out or takeoff clearance.
For GA pilots, the Visual Departure remains an interesting IFR tool: it can shorten long or impractical departure procedures and, under suitable conditions, enable a more flexible route guidance. At the same time, it shifts a significant part of the responsibility onto the pilots, because for obstacle-free visibility during the visual segment, it is not ATC but the crew that is responsible.
Source references:
NFL
